Application Instructions (Wet Installation Method) Prep the surface Thoroughly clean the target glass or smooth surface to remove all dust, grease, dirt and residue. Wipe completely dry with a lint-free cloth. Prepare the spray solution Fill a spray bottle with clean water (1-2 drops of mild dish soap is optional for easier positioning). Shake gently to mix. Mist both surfaces Slowly peel off the backing paper from the sticker. Evenly spray a light layer of mist onto both the adhesive side of the sticker and the target glass surface. Align and apply Place the sticker onto the wet surface and adjust it to your desired position. The wet application allows you to reposition the decal freely for perfect alignment. Squeegee out water and air Use a plastic squeegee (or a smooth rigid card like a bank card) to press firmly on the sticker. Work slowly from the center outward toward all edges, squeezing out all excess water and trapped air bubbles until the decal lies completely flat and secure. Allow full curing Leave the sticker to air-dry for at least 24 hours. Do not touch, wipe, wash or apply pressure to the decal during this curing period. Care & Maintenance Tips Once fully cured, the PET sticker is waterproof and UV-resistant. Clean gently with a soft damp cloth; avoid abrasive sponges, sharp objects or harsh chemical cleaners. For car window application, avoid high-pressure car washes targeting the sticker edges directly for the first 72 hours. For best adhesion and residue-free removal, do not apply the sticker to textured, porous, freshly painted or cracked surfaces.
Application Instructions (Wet Installation Method) Prep the surface Thoroughly clean the target glass or smooth surface to remove all dust, grease, dirt and residue. Wipe completely dry with a lint-free cloth. Prepare the spray solution Fill a spray bottle with clean water (1-2 drops of mild dish soap is optional for easier positioning). Shake gently to mix. Mist both surfaces Slowly peel off the backing paper from the sticker. Evenly spray a light layer of mist onto both the adhesive side of the sticker and the target glass surface. Align and apply Place the sticker onto the wet surface and adjust it to your desired position. The wet application allows you to reposition the decal freely for perfect alignment. Squeegee out water and air Use a plastic squeegee (or a smooth rigid card like a bank card) to press firmly on the sticker. Work slowly from the center outward toward all edges, squeezing out all excess water and trapped air bubbles until the decal lies completely flat and secure. Allow full curing Leave the sticker to air-dry for at least 24 hours. Do not touch, wipe, wash or apply pressure to the decal during this curing period. Care & Maintenance Tips Once fully cured, the PET sticker is waterproof and UV-resistant. Clean gently with a soft damp cloth; avoid abrasive sponges, sharp objects or harsh chemical cleaners. For car window application, avoid high-pressure car washes targeting the sticker edges directly for the first 72 hours. For best adhesion and residue-free removal, do not apply the sticker to textured, porous, freshly painted or cracked surfaces.
.jpg?w=1440&h=224)
.svg?w=1852&h=706){kind=logo}
